Most construction vehicles fall into four groups: earthmoving machines that dig and grade, hauling and concrete vehicles that move and place material, cranes and material handlers that lift loads, and aerial lifts that put people at height. Knowing which group a job belongs to tells you which machine to look for. This guide walks through each group, names the common machines in it, explains what they do, and shows how lifts such as scissor lifts, boom lifts and telehandlers fit in.
TL;DR
- Earthmoving machines (excavators, bulldozers, backhoes, loaders, graders) shape the ground. Haulers and mixers move material. Cranes and telehandlers lift it. Aerial lifts raise workers.
- Match the machine to the task first: digging, pushing, hauling, lifting loads, or lifting people. Size and fuel type come second.
- Aerial lifts come in two main families: scissor lifts for straight-up access, and boom lifts for reach up and over obstacles.
- Operator training and daily checks are part of owning any of these machines, and OSHA sets specific rules for aerial lifts and cranes.
- If you need a telehandler, lift or other jobsite machine, we locate and broker fleet-maintained units nationwide.
Table of Contents
- Construction vehicles at a glance
- Earthmoving machines
- Hauling and concrete vehicles
- Cranes
- Telehandlers and other material handlers
- Aerial lifts and aerial work platforms
- Our perspective
- How to choose the right machine
- Safety basics every operator should know
- Find the machine you need
- FAQ
- Sources
Construction vehicles at a glance
There is no single official list of construction vehicles, but the trade sources agree on the broad groupings. ServiceTitan sorts equipment into earthmoving, material handling, construction vehicles (dump trucks, mixers, tankers) and roadwork equipment. A U.S. market report from Bonafide Research uses a similar split: earth moving machinery, material handling machinery, and concrete and road construction machinery.
Here is the version we use when a contractor, farm or municipality calls us.
| Group | Typical machines | Main job |
|---|---|---|
| Earthmoving | Excavators, bulldozers, backhoe loaders, wheel loaders, graders, trenchers | Dig, push, scoop, level |
| Hauling and concrete | Dump trucks, articulated haulers, concrete mixer trucks | Move loose material, deliver concrete |
| Lifting and material handling | Cranes, telehandlers, forklifts | Lift and place loads |
| Access equipment | Scissor lifts, boom lifts, other aerial work platforms | Put workers and tools at height |
| Roadwork | Asphalt pavers, rollers, compactors | Lay and compact road surfaces |
The rest of this page goes group by group.
Earthmoving machines
Earthmoving equipment does the first work on almost every site: opening the ground, moving it, and shaping it. OSHA’s earthmoving equipment rule names scrapers, loaders, crawler or wheel tractors, bulldozers, off-highway trucks, graders and agricultural and industrial tractors as the covered types, which tells you how wide the category runs.
Excavators
An excavator has a long boom and arm with a bucket on the end, mounted on a cab that swivels. That swivel lets the operator dig, lift and dump without repositioning the machine, according to Family Handyman. Geotab adds that with attachments they also handle demolition and heavy lifting. Excavators are the default choice for foundations, trenching and demolition.
Bulldozers
A bulldozer carries a large blade at the front for pushing, moving and leveling soil and other material (Family Handyman). Think of it as the machine for pushing earth, rough grading and clearing land.
Backhoe loaders
A backhoe loader combines a front bucket with a rear digging arm. CoastPay lists its jobs as trenching, foundation excavation, stump removal, moving loose dirt into a dump truck, unloading freight, and laying cable and pipe. If you are weighing it against a compact excavator, this backhoe versus mini excavator comparison looks at cost and safety for contractors.
Wheel loaders and front end loaders
These machines use a big, deep bucket to scoop loose material and bulky items, then carry it a short distance or load a truck (Family Handyman). They are common at quarries, yards and farms as much as on building sites.
Motor graders
Graders arrive after rough grading to refine the surface. Hoopaugh Grading describes the long adjustable blade as essential for road construction, drainage control and paving preparation.
Trenchers
Trenchers cut narrow channels. They are most often used for laying pipe, installing drainage tile and running cable, per CoastPay.
Hauling and concrete vehicles
Dump trucks
Dump trucks carry loose material such as soil, gravel and demolition debris. Beds range from standard truck-bed size up to about 16 yards, according to Family Handyman. CoastPay notes that loads can range from one ton to as much as 500 tons, which covers everything from a small tipper to a mine haul truck.
Articulated dump trucks are a separate type built for rough ground. Hoopaugh Grading says they haul large volumes across rugged terrain with tight turns and steep grades, where a standard road-going dump truck would struggle.
Concrete mixer trucks
Mixer trucks carry wet concrete to the site for foundations, piers, footings and other structural members (Family Handyman). They keep the concrete mixed in transit so it can be poured when it arrives.
Rollers, compactors and pavers
Roadwork machines finish what the earthmovers start. Compactors and rollers squeeze soil, asphalt and other materials using static weight, vibration or kneading action to remove air gaps and raise density (Hoopaugh Grading). Asphalt pavers lay the surface that rollers then compact (FleetPace).
Cranes
Cranes lift heavy loads and place them at height, and they come in many sizes. CoastPay puts the upper end of lifting capacity at 3,000 tons. The legal definition is broader than most people expect. OSHA’s crane standard scope covers:
- Articulating (knuckle-boom) cranes
- Crawler cranes
- Mobile cranes, including wheel-mounted, rough-terrain, all-terrain, truck-mounted and boom trucks
- Tower cranes, including hammerhead, luffing boom and self-erecting
- Overhead and gantry cranes, pedestal and portal cranes, derricks and several others
For most building sites the practical split is tower cranes for high-rise work, mobile cranes that travel between locations, and truck-mounted cranes for smaller lifts (Geotab).
Telehandlers and other material handlers
A telehandler is a forklift with a telescoping boom. It moves palletized materials and can place them on roofs, upper floors or across gaps that a standard forklift cannot reach (FleetPace). That reach is why they have become a staple on framing, roofing and masonry jobs, and on farms where one machine has to stack hay, load trucks and move pallets.
Telehandlers are one of the machines we handle every week. Our guide to what a telehandler does onsite goes deeper on everyday uses. Some buyers also ask about putting a work platform on the forks, which has its own rules; we cover those in our telehandler work platforms guide.
Aerial lifts and aerial work platforms
An aerial work platform gives one or more people, plus their tools, safe access to a work area that would otherwise be out of reach, as Haulotte North America explains. Haulotte lists the main types as low-level access platforms, push-around platforms, vertical mast platforms, scissor lifts, telescopic boom lifts, and lightweight towed or self-propelled platforms.
On construction sites, two families do most of the work. OSHA’s overview of construction lifts splits them into scissor lifts, which raise people straight above the base, and boom lifts, which carry people up and out with a movable arm.

Scissor lifts
If you need a roomy, stable platform and do not need horizontal reach, a scissor lift is the usual answer, according to Construction Executive. Common subtypes include:
- Electric scissor lifts: suited to indoor work, per OSHA’s blog.
- Diesel scissor lifts: designed for outdoor use only.
- Rough terrain scissor lifts: built for sloped or uneven ground.
- Slab and single-person scissor lifts: compact models for finished floors and tight spaces (Construction Executive).
For a compact slab-style example, see this 2019 JLG 1932R scissor lift.
Boom lifts
Boom lifts give you more height than scissor lifts. The two main designs behave differently:
- Telescopic (straight) boom lifts reach high and far in a straight line. OSHA’s blog says telescoping models can support vertical lifts up to 210 feet. Our page on telescopic boom lifts covers reach and sizing.
- Articulating (knuckle) boom lifts have less horizontal reach but can lift workers up and over, or over and under, obstacles (Construction Executive). They also maneuver in tight quarters. See our guide to articulating boom lifts.
Towable boom lifts, such as the 2018 JLG T350, are a lighter option you can pull behind a truck between sites.
Lifts that are not work platforms
Construction hoists move materials and personnel to great heights, but they are not mobile like MEWPs and are not designed as work platforms. OSHA’s blog describes them as picking up where MEWPs leave off. If your job is a tall building, you may need both.
Our perspective
Most buyers who call us do not need a lecture on machine categories. They need the right machine in the right place before a schedule slips. The mistake we see most often is shopping by name instead of by task: someone asks for a lift when what they really need is a telehandler, or the reverse.
Our advice is to write down the heaviest load, the highest point, the ground conditions and the number of people working. Those four answers narrow the field quickly. A telehandler is hard to beat when you are moving pallets to height all day. A boom lift is the right call when people need to reach out and over. A scissor lift wins when the work is directly overhead on a firm floor.
This is where a broker earns its keep. We work with fleet-maintained equipment from major rental companies, we have been in the industry for over nine years, and we look for the hard-to-find units that never reach a public listing. We aim to give you straight answers about what fits your job, and we are veteran owned, so plain communication is how we work.
Ben
How to choose the right machine
Start with the work, not the catalog.
- Define the task. Digging, pushing, hauling, lifting a load, or lifting a person. Each points to a different group above.
- Check the site. Soft or sloped ground favors tracks, articulated haulers and rough-terrain lifts. Finished floors favor electric slab scissor lifts. Hoopaugh Grading’s note that articulated trucks suit rugged terrain is a good example of ground driving the choice.
- Size for the heaviest case. Rated capacity and reach are limits, not targets.
- Consider versatility. Attachments change what a machine can do. Excavators take buckets, breakers and more, and parts and attachments widen a telehandler’s range too.
- Plan the purchase. Compare buying used fleet units, financing, or selling an older machine through consignment or auction. Our page on consignment or auction for construction equipment covers that side.
For a farm or municipality buying once every few years, a versatile machine like a telehandler often covers more tasks than a specialist machine. A contractor running a fleet may buy several narrower tools.
Safety basics every operator should know
The machines above are only productive when they are run correctly. These are the U.S. rules operators meet most often.
- Aerial lifts: OSHA’s aerial lift standard calls for daily testing of lift controls, operation by authorized persons only, firm footing on the basket floor, no sitting or climbing on the edges, and no planks or ladders for extra height. It also requires a body belt with a lanyard attached to the boom or basket.
- Standards by type: the ANSI A92 family maps to equipment classes. IPAF’s guidance notes A92.3 covers manually propelled platforms, A92.5 boom-type platforms and A92.6 scissor-type platforms.
- No field modifications: Michigan’s aerial work platform rules require written certification from the manufacturer or an equivalent entity for any modification beyond intended use. Check your own state’s rules, since some states run their own programs.
- Back-up alarms: under USACE EM 385-1-1, self-propelled equipment and dump trucks whose view to the rear is permanently blocked need an alarm, audible above surrounding noise and operating automatically in reverse. That is a requirement for USACE work, and many other sites adopt it as practice.
For cranes, check the current OSHA cranes and derricks standard and confirm operator certification requirements with your state and your insurer before assigning anyone to a lift.
Find the machine you need
If your list includes telehandlers, boom lifts, scissor lifts or other jobsite machinery, we can source them. TrueBrady is a veteran-owned dealer and broker that locates wholesale-priced, fleet-maintained equipment from major rental companies for contractors, businesses, farms and municipalities across the U.S. Tell us what you need and we will go looking, including for units that are hard to find. See our brokering and nationwide procurement services to start.
Need attachments or replacement components? Browse our parts and attachments. If you are planning a bigger purchase, our equipment financing page explains the financing option. To see lifts we have handled, look at the 2015 JLG G12-55A or the 2015 Genie GR20 personnel lift.
FAQ
What are the most common types of construction vehicles?
Excavators, bulldozers, backhoe loaders, wheel loaders, dump trucks, concrete mixer trucks and cranes appear on most sites. Telehandlers and aerial lifts are just as common on building projects. Graders, rollers and pavers show up on road work.
What is the difference between a scissor lift and a boom lift?
A scissor lift raises the platform straight up on crisscrossed supports, which gives a roomy, stable deck. A boom lift uses an arm that can reach up and out, so workers get over obstacles. Choose a scissor lift for overhead work on a firm surface and a boom lift when you need reach.
What is the difference between a telehandler and a forklift?
A standard forklift lifts straight up a mast. A telehandler has a telescoping boom, so it can reach forward and up to place palletized loads on roofs, upper floors or beyond obstacles. That reach is why telehandlers are common on construction sites and farms.
Do I need training to operate these machines?
Yes. OSHA’s aerial lift rules allow only authorized persons to operate lifts, and crane operators generally need certification under the federal crane standard. Ask your safety manager or the equipment maker about training for each machine class before the first shift.
Sources
- ServiceTitan: 30 Construction Equipment Types and Their Uses
- Bonafide Research: United States Construction Equipment Market Overview
- OSHA 1926.602: Material handling equipment
- Family Handyman: Different Types of Construction Vehicles
- Geotab: 26 Types of Construction Vehicles
- CoastPay: 20 Types of Construction Vehicles
- Hoopaugh Grading: Commercial earthwork contractor equipment
- FleetPace: Types of Construction Vehicles
- OSHA 1926.1400: Cranes and derricks scope
- Haulotte North America: Choosing Your Aerial Work Platform
- OSHA.com: What are the Different Kinds of Construction Lifts?
- Construction Executive: Pick the Best Aerial Lift for the Job
- OSHA 1926.453: Aerial lifts
- IPAF: ANSI Standards User Guidance
- MIOSHA Part 32: Aerial Work Platforms
- USACE EM 385-1-1, Section 18
Recommended
- Excavator Sizes: Classes, Weights and How to Pick Yours
- Telescopic Boom Lifts: Types, Reach and How to Choose
- Rough Terrain Forklifts: Types, Specs and How to Buy
- Unlocking Versatility: The Essential Role of a Telehandler onsite



