2021 JLG G5-19A

Performance
Rated Capacity
At 24 in. (610 mm) load center,
5,500 lb (2,495 kg)
Maximum Lift Height
18 ft (5.5 m)
Maximum Forward Reach
10 ft 10 in. (3.3 m)
Capacity at Maximum Lift Height
4,400 lb (1,196 kg)
Capacity at Maximum Forward Reach
1,850 lb (839 kg)
Lift Speed (boom retracted)
Up: 6.2 sec
Down: 4.3 sec
Boom Speed
Extend: 6.3 sec
Retract: 3.4 sec
Travel Speed Forward
17 mph (27.4 kmph)
Drawbar Pull
8,700 lb (3,946 kg)
Breakout Force
7,650 lb (3,470 kg)
Operating Weight with 48″ carriage and forks
10,800 lb (4,899 kg)
Standard Specifications
Engine
Make and Model Perkins 1104D
Fuel No. 2 Diesel
Cycles 4
No. of Cylinders 4
Displacement 268.4 cu in. (4.4 L)
Rated Speed 2,200 rpm
Max. Gross BHP 84 hp (63 kW)
Fuel Tank 24 gal (91 L)
Engine Filters
Two-stage dry air cleaner — centrifugal
pre-cleaner with continuous dust ejector
and replaceable dry filter element.
Visual service indicator.
Glow Plugs
Electrical System
Voltage: 12V
Alternator: 75 amp
Battery: 950 cold cranking amps at 0°F
Transmission
Hydrostatic
Axles
High bias limited slip differential
on front axle.
Planetary on front and rear axle.
Service Brakes
Inboard wet disc brakes on front axle.
Parking Brakes
Wet disc spring-applied hydraulic release.
Light on dash indicates when brake is on.
Tires
Standard: 12 x 16.5
Cab
Certified ROPS/FOPS structure, adjustable
suspension seat.
Steering 4-Wheel
Operator selectable 4-wheel circle,
4-wheel crab, 2-wheel front.
Instruments
Indicators for machine hours, fuel-level,
steering pressure, alternator, pre-heat,
coolant temperature, parking brake and
oil pressure
Reverse motion alarm.
Panel and switches are illuminated
for night operation
Controls
Grouped for operator comfort and convenience.
Single joystick proportional controls.
Hydraulic System-Implement
Single-section gear pump.
17 gal (64.4 L) system capacity.
10 micron filter with visual service indicator
and suction strainer.
Lift, crowd, and tilt cylinders have holding
valves intended to prevent dropping of load
in the event of hose failure.
Auxiliary Hydraulic Circuit
Consists of valves, controls and
hydraulic lines
Attachment Tilt
125 degrees
Accessories & Options
Enclosed Cab
Battery Disconnect Switch
Road Light Package
Work Light Package
Skylight/Rear Wiper Package
Radio Ready Kit (Enclosed Cab Only)
Molded Floor Mat
Tow Hitch w/trailer plug
Tow Hitch w/automatic pin & trailer plug
Fenders
Brick Guard
Air Conditioning
Block Heater
Tilt Steering
Hydraulic Quick Switch
Rear Auxiliary Hydraulics
Universal Skid Steer Coupler
Tire Options:
Foam-Filled
14 x 17.5
Attachments
Standard Carriage
48 in. (1.2 m)
Side Tilt Carriage
48 in. (1.2 m)
Pallet Forks
2 x 4 x 48 in. (51 mm x 102 mm x 1.2 m)
Lumber Forks
1.5 x 6 x 48 in. (38 mm x 152 mm x 1.2 m)
Cubing Forks
2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
General Purpose Bucket
1.0 cu yd (0.76 m3
) — 73 in. (1.85 m)
Light Material Bucket
1.7 cu yd (1.29 m3
) — 72 in. (1.8 m)
Grapple Bucket
1.0 cu yd (0.76 m3
) — 72 in. (1.8 m)
Crane Hook
Fork Mounted Work Platform
Universal Skid Steer Adapter

Dimensions
A. Length (less forks) 144.2 in. (3.7 m)
B. Width 71.5 in. (1.8 m)
C. Height 75.6 in. (1.9 m)
D. Wheelbase 90.0 in. (2.3 m)
E. Ground Clearance 10.8 in. (274 mm)
F. Outside Turning Radius 126.0 in. (3.2 m)

Model
G5-18A
TELEHANDLER